Belkin share N300 Wireless MIMO +USB port router.
Belkin share N300 wireless MIMO USB router is one of its kinds. This router has a single USB port which allows us to connect some devices like HDD disk to the router or a wired printer to a network through the router. Belkin has been much trustworthy, durable and impeccable brand in the network equipment sector. We need to setup the router prior to its use. The Belkin wireless router setup page can be accessed through the IP address “192.168.2.1”. We need to sign in to the web browser of our computer through the link www.192.168.2.1.com. The Belkin wireless setup homepage can be accessed through this link. Setting up a router starts with a few initial steps. Some of them are listed below.
Unbox the contents of the Belkin router.
Connect every component of the Belkin router in their place.
Open the web browser of your computer and enter the address http:/192.168.2.1 in the address bar.
A login page of the router will appear at the front and enter the password. Leave the password field blank if the password is not set earlier.
Now, configure your router in the “Internet WAN” section.
Click “Apply” and “Save changes” to reboot the router. In this way, your Belkin router will be configured.
Belkin share N300 wireless MIMO USB router
Belkin wireless router setup
The Belkin wireless setup also includes various customization in the router. We can change the password of the router, reset the router, we can enhance the Wi-Fi connectivity of the router by adding a Wi-Fi extender. The Wi-Fi extender is also set up in the same way as that of Belkin wireless router setup.
Failure in accessing the router’s interface.
The router login page access can sometimes fail due to some unavoidable reasons. Some problems are discussed below.
Problems with the web browser
The web browsers can sometimes be outdated and incompatible with the router’s web portal. This issue can be resolved by accessing the Belkin wireless router setup through an incognito window of the Google Chrome browser. The incognito window doesn’t store any cookies, caches or wrongly entered passwords. The incognito mode doesn’t auto-fill the user’s passwords previously entered. This is the most common reason due to which we cannot access the interface of the router.
What if we forgot the router’s password?
A user can easily forget the login credentials of the router but however, the router’s password can be reset by resetting the router by pressing the “hard reset” button given at the back of the router. The user needs to press the reset button for 10-15 seconds continuously.
Accessing the router interface through Ethernet.
Belkin wireless router belkin setup page can also be accessed through the wired method. The wired method requires the user to connect the router to the computer through the Ethernet cable. The wired connection is quite fast often although the wired connection limits the connectivity of the router to multiple devices. The Belkin share N300 wireless MIMO USB router have four Ethernet/LAN ports. It means 4 wired connections of different devices can be made on the router.